If the brake of the electric hoist is severely worn, it is a problem that needs to be dealt with in a timely manner to ensure the safe operation of the equipment and avoid potential accidents. Here are some suggested steps to address this issue:

1. Stop using immediately

Once the brake of the electric hoist is found to be severely worn, the equipment should be immediately stopped and any lifting or hoisting operations should be avoided. The brake is an important safety device for electric hoists, and its wear and tear may cause the equipment to lose control, leading to accidents.

2. Inspection and evaluation

Conduct a comprehensive inspection and evaluation of the brake system of the electric hoist to determine the specific degree and cause of wear. Check the wear of key components such as brake pads, brake discs, and springs, and observe for any abnormal noise, vibration, or temperature rise.

3. Replace brake components

If the brake pads or brake discs are severely worn and cannot be used anymore, new brake components should be replaced in a timely manner. During the replacement process, it is necessary to ensure the use of brake components produced by legitimate manufacturers that match the equipment model, and to replace them according to the equipment manual or the guidance of professional technicians.

4. Adjust the brake system

After replacing brake components, it may be necessary to make appropriate adjustments to the brake system to ensure its proper functioning. This includes adjusting parameters such as brake pad clearance and spring tension to ensure that the braking system can reliably brake the equipment.

5. Lubrication and maintenance

Regularly lubricate and maintain the brake system of the electric hoist to reduce wear and extend its service life. Lubricate the brake components with appropriate lubricants and clean the dust and debris around the brake system.

6. Seek professional assistance

If you are not familiar or unsure about the maintenance and adjustment of the brake system, you should seek the help of professional technicians. They possess professional knowledge and skills to accurately diagnose and solve problems, and ensure the safe operation of equipment.

7. Recording and monitoring

After repairing and replacing brake components, relevant information such as repair date, replaced parts, adjusted parameters, etc. should be recorded. At the same time, the braking system of the electric hoist should be monitored and inspected regularly to detect and solve problems in a timely manner.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment