The deviation of single beam crane equipment during walking can be caused by various factors. However, specific reasons for this deviation may not be comprehensively listed here due to the complexity of crane operations and the variety of potential issues. Generally, some common causes can be summarized as follows:

Uneven Ground or Track Conditions:

If the ground or track on which the crane is operating is uneven or damaged, it can cause the crane to deviate from its intended path.

Irregularities in the track or ground surface can lead to uneven wheel loads, resulting in the crane veering off course.

Mechanical Wear and Tear:

Over time, components such as wheels, bearings, and guides may wear down, affecting the crane's ability to maintain a straight path.

Wear and tear can lead to increased friction and reduced efficiency, making it harder for the crane to stay on track.

Improper Operation or Control:

Operator error or improper control of the crane can lead to deviation.

If the operator does not apply the correct amount of force or control inputs, the crane may not respond as expected and may deviate from its intended path.

Load Imbalance:

An unevenly distributed load can cause the crane to tip or sway, leading to deviation.

Ensuring that the load is balanced and securely fastened can help prevent this type of deviation.

Environmental Factors:

Wind, temperature changes, and other environmental factors can affect the crane's performance and cause deviation.

Strong winds, for example, can exert forces on the crane that cause it to sway or move off course.

Maintenance and Inspection Issues:

Inadequate maintenance or inspection of the crane can lead to undetected problems that contribute to deviation.

Regular maintenance and inspections are crucial for identifying and addressing potential issues before they become critical.

To prevent or minimize deviation of single beam crane equipment during walking, it is important to:

Ensure that the ground or track is even and in good condition.

Regularly inspect and maintain the crane to identify and replace worn components.

Train operators to properly control and operate the crane.

Balance and securely fasten loads to prevent swaying or tipping.

Monitor environmental factors and adjust crane operations as necessary to mitigate their impact.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment