To ensure the longevity and safe operation of stainless steel manual carts, regular protection and inspection are essential. Here’s a structured approach to their maintenance:

1. Daily Inspection

Visual Check:

Examine the body, wheels, handles, and brakes for cracks, deformities, or loose components.

Ensure all fasteners (screws, nuts) are tightened to prevent wobbling or detachment during use.

Functional Test:

Confirm brakes engage smoothly and wheels rotate freely without resistance.

Test steering and load-bearing capacity with a small sample load.

Cleaning:

Wipe the cart with a damp cloth and mild detergent to remove dust, stains, or chemical residues.

Avoid abrasive cleaners to prevent scratches on the stainless steel surface.

2. Routine Maintenance

Lubrication:

Apply grease to wheels, bearings, and hinges every 1–3 months to reduce friction and noise.

Use high-quality lubricant suitable for stainless steel.

Wheel Replacement:

Replace worn or damaged wheels immediately to maintain stability.

Check wheel alignment and tighten axles if necessary.

Tightening Components:

Regularly inspect and tighten screws, nuts, and bolts to prevent loosening over time.

3. Special Environment Checks

Corrosive Environments:

After use in acidic or chemical-rich settings, rinse the cart thoroughly with clean water and dry it to prevent corrosion.

Consider upgrading to 316-grade stainless steel for severe conditions.

Humid Conditions:

Check for rust on joints and welds; apply rust inhibitor if needed.

Ensure ventilation in storage areas to reduce moisture buildup.

4. Long-Term Storage

Storage Environment:

Keep the cart in a dry, cool, and dust-free location.

Avoid storing near heat sources or in direct sunlight to prevent material degradation.

Periodic Checks:

Even during storage, inspect the cart every 1–2 months for signs of rust, loose parts, or flat tires.

Recharge the battery (if applicable) every 3 months to prevent discharge.

5. Safety Protocols

Load Limits:

Never exceed the cart’s maximum load capacity (check manufacturer specifications).

Distribute weight evenly to avoid tipping.

Operational Safety:

Avoid sudden stops or sharp turns to prevent cargo from shifting.

Use brakes on slopes or uneven terrain to maintain control.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment