There are significant differences between CD1 electric hoist and MD1 electric hoist in multiple aspects. The following is a detailed analysis of the differences between the two:

1. Parameters and speed

CD1 electric hoist: Its lifting speed is single speed, which means there is only one fixed lifting speed, usually meeting general usage needs.

MD1 electric hoist: Improved on the basis of CD1, adding slow lifting function, that is, it has dual speed lifting capability. The slow speed is usually one tenth of the fast speed, which allows MD1 to more accurately control the height when lifting objects.

2. Configuration and Structure

CD1 electric hoist: The configuration is relatively simple, and the lifting motor is usually a single motor. There are also fewer contactors and control handle buttons inside the electrical box.

MD1 electric hoist: It has an additional auxiliary lifting motor compared to CD1, and the lifting motor is a dual motor configuration. From the appearance, it can be clearly seen that MD1 has an additional small lifting motor in the parallel position of CD1 lifting motor. In addition, the contactor inside the electrical box of MD1 is also different, with additional buttons for slow up and slow down on the control handle.

3. User experience

CD1 electric hoist: Due to only single speed lifting, it may be difficult to accurately control the lifting of objects to a specified height, and it is easy to exceed or not reach the target position.

MD1 electric hoist: Due to its dual speed lifting function, it can first use the fast speed to improve efficiency when lifting objects, and then switch to slow speed for precise adjustment when approaching the target position, thus achieving the specified height more accurately. This design is particularly suitable for situations where strict requirements are placed on the lifting position and high work efficiency is needed.

4. Scope of application

CD1 and MD1 electric hoists belong to the category of wire rope electric hoists, and their application scope is generally the same. They are widely used in factories, mines, railways, docks, warehouses, and service industries. However, due to its precise control characteristics, MD1 has better applicability in places that require precise adjustment such as precision installation, clamping work, and sand casting.

5. Operating conditions

Both are similar in operating conditions, usually able to operate at ambient temperatures ranging from -20 ℃ to+40 ℃, and follow the working system of intermediate JC25% or heavy JC40%.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment