Summary of Common Malfunctions of Ultra Low Clean Hand Pulling Gourd (Ultra-Low Clean Hand Chain Hoist)

The ultra-low clean hand chain hoist is a specialized lifting tool designed for applications requiring high cleanliness standards. However, like any mechanical device, it may encounter various malfunctions during use. Below is a summary of common malfunctions and corresponding troubleshooting methods:

1. Failure to Lift

Possible Causes:

The handle is stuck.

The chain has fallen off or broken.

Lack of lubrication inside the hoist.

Troubleshooting Methods:

Inspect and clean or replace the stuck handle if necessary.

Check the chain for any signs of damage and replace it if found defective.

Apply lubricant to ensure smooth operation of internal parts.

2. Insufficient Lifting Capacity

Possible Causes:

The load exceeds the hoist's rated capacity.

Internal parts of the hoist are damaged.

Troubleshooting Methods:

Reduce the load to within the hoist's rated capacity.

Inspect internal parts for damage and replace any defective components or the entire hoist if necessary.

3. Mechanical Jam or Abnormal Noise

Possible Causes:

Wear and tear on gears, bearings, or other moving parts.

Accumulation of dirt or debris inside the hoist.

Troubleshooting Methods:

Regularly clean and lubricate the hoist to prevent dirt and debris buildup.

Replace worn-out gears, bearings, or other parts as needed.

4. Chain Derailment or Breakage

Possible Causes:

Improper use or excessive force applied to the chain.

Defective chain material or manufacturing defects.

Troubleshooting Methods:

Ensure proper use and handling of the chain to prevent derailment or breakage.

Inspect the chain regularly for any signs of wear or damage and replace it promptly if found defective.

5. Electrical Faults (for electric-powered models)

Possible Causes:

Malfunctioning control panel or circuit board.

Power supply issues or defective wiring.

Troubleshooting Methods:

Inspect the control panel and circuit board for any signs of damage and replace them if necessary.

Check the power supply and wiring for any defects and repair or replace them as needed.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment