Safety operation regulations for a single beam crane are crucial to ensure the safe and efficient use of the equipment. Below is a comprehensive set of regulations:

General Regulations

Operator Qualification:

Operators must be specially trained and qualified, holding valid crane operation certificates issued by relevant departments.

Operators must be familiar with the structure, performance, safety devices, and operational requirements of the single beam crane.

Pre-Operational Checks:

Conduct a thorough inspection of the crane's functions and safety devices before each use.

Ensure the crane is in good working condition and there are no abnormalities or faults.

Operational Requirements:

Adhere to the crane's rated lifting capacity and avoid overloading.

Operate the crane smoothly, avoiding sudden stops and starts to prevent damage to the equipment and ensure safety.

Specific Safety Regulations

Lifting and Moving Loads:

Before lifting, ensure that the load is securely fastened and properly balanced.

Avoid dragging or swaying the load during lifting to prevent damage to the crane and ensure stability.

When lifting heavy loads, use appropriate lifting techniques and ensure the crane is stable.

Operating Environment:

Ensure the operating environment is safe and free of obstacles.

Avoid operating the crane in high-temperature, humid, explosive, or flammable environments.

Keep the crane's operating area clean and organized to prevent accidents.

Emergency Stop and Safety Devices:

Familiarize yourself with the emergency stop buttons and other safety devices on the crane.

In case of emergencies, immediately press the emergency stop button to stop the crane.

Regularly check the effectiveness of safety devices such as limiters and height restrictors.

Personal Protective Equipment:

Operators must wear appropriate personal protective equipment such as hard hats, protective footwear, and safety harnesses.

Ensure that all protective equipment is in good condition and meets safety standards.

Maintenance and Inspection:

Regularly maintain and inspect the crane to ensure its safe performance.

Keep the crane clean and free of debris to prevent accidents.

Address any faults or abnormalities immediately and do not operate the crane if it is not in good working condition.

Training and Education:

Provide regular training and education to operators on crane safety operations.

Ensure operators are aware of the latest safety regulations and operational requirements.

Additional Safety Tips

Communication and Coordination:

Maintain effective communication and coordination with other operators and personnel in the operating area.

Use clear and concise signals to avoid misunderstandings and ensure safe operations.

Avoidance of Hazards:

Be aware of potential hazards in the operating area and take appropriate measures to avoid them.

Avoid operating the crane near power lines or other hazardous areas.

Documentation and Record Keeping:

Keep accurate records of crane inspections, maintenance, and repairs.

Document any incidents or accidents involving the crane and take corrective measures to prevent recurrence.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment