Maintaining and upkeeping a stainless steel manual trolley is crucial for ensuring its longevity, functionality, and appearance. Here are some precautions and best practices to follow:

1. Regular Cleaning

Daily Wipe-Down: Use a soft, microfiber cloth to remove dust, dirt, and debris after each use. This prevents buildup that can scratch the surface or trap moisture.

Deep Cleaning:

Warm Soapy Water: For general cleaning, use a mild detergent with warm water. Avoid abrasive cleaners, bleach, or chloride-based products, as they can damage the stainless steel's protective layer.

Grain Direction: Always wipe in the direction of the stainless steel grain to avoid streaks and scratches.

Dry Thoroughly: After cleaning, dry the trolley completely with a clean cloth to prevent water spots and rust.

2. Preventing Rust and Corrosion

Avoid Harsh Chemicals: Chlorine, acids, and abrasive cleaners (e.g., steel wool, scouring pads) can break down the protective chromium oxide layer on stainless steel, leading to rust.

Protect from Moisture: Store the trolley in a dry, well-ventilated area. If it gets wet, dry it immediately to prevent moisture from causing corrosion.

Use Stainless Steel Cleaners: For stubborn stains or to restore shine, use a non-abrasive stainless steel cleaner. Apply with a soft cloth and follow the product instructions.

3. Lubrication of Moving Parts

Wheels and Hinges: Regularly lubricate wheels, castors, and any moving parts with a silicone-based lubricant or light oil. This ensures smooth operation and reduces wear and tear.

Avoid Over-Lubrication: Excess lubricant can attract dust and debris, so apply sparingly.

4. Handling and Storage

Avoid Rough Handling: Stainless steel can dent or scratch if mishandled. Avoid dropping or colliding the trolley with hard objects.

Store Properly: When not in use, store the trolley in a clean, dry location away from direct sunlight and extreme temperatures. This prevents discoloration and material degradation.

5. Inspection and Maintenance

Regular Inspections: Check for signs of wear, such as loose screws, wobbly wheels, or damaged trays. Tighten screws and replace worn parts promptly.

Wheel Maintenance:

Check for Debris: Remove any debris stuck in wheels or castors to prevent damage to floors and ensure smooth movement.

Replace Worn Wheels: If wheels show signs of excessive wear or noise, replace them with compatible, high-quality wheels.

Handle and Frame Care: Ensure the handle is securely attached and the frame is free from cracks or bends. Repair or replace damaged components as needed.

6. Environmental Considerations

Avoid Harsh Environments: Stainless steel is corrosion-resistant, but prolonged exposure to saltwater, chemicals, or extreme humidity can still cause damage. Rinse the trolley thoroughly after exposure to such environments.

Temperature Control: Avoid leaving the trolley in direct sunlight or near heat sources, as this can cause warping or discoloration.

7. Professional Maintenance

Deep Cleaning Services: For heavily soiled or stained trolleys, consider professional cleaning services that use specialized equipment and solutions.

Manufacturer Guidelines: Always refer to the manufacturer's maintenance manual for specific care instructions and warranty details.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment