When disassembling and assembling wire rope electric hoists, a series of preventive measures need to be followed to ensure the safety and effectiveness of the operation. Here are some key precautions:

1、 Preparation work

Power outage and labeling: Before starting disassembly or assembly, be sure to cut off the power and hang a "Do Not Close" sign at the power switch to prevent accidental power on.

Personal protection: Wear appropriate personal protective equipment such as gloves, safety shoes, goggles, etc. to prevent injury during operation.

Tool preparation: Prepare necessary tools such as screwdrivers, wrenches, pliers, etc., and ensure that these tools are in good condition.

2、 Dismantling process

Sequential disassembly: Disassemble each component in order according to the disassembly guide or drawing provided by the manufacturer. Avoid disassembling or skipping certain steps at will.

Marking and recording: During the disassembly process, mark and record each component so that they can be correctly identified and installed during assembly.

Handle with care: During the disassembly process, handle each component carefully to avoid damage or loss. Especially for key components such as steel wire ropes and pulleys, special attention should be paid to their protection.

3、 Assembly process

Cleaning and Inspection: Before assembly, clean and inspect each component to ensure that there is no damage or wear. Especially for steel wire ropes and pulleys, it is necessary to check their wear and replace damaged components.

Correct installation: Install each component in the correct order and manner according to the assembly guide or drawing provided by the manufacturer. Ensure that each component is installed in place and securely fixed.

Adjustment and testing: After assembly, adjust and test the electric hoist. Check whether it runs smoothly, whether the braking is reliable, and whether the steel wire rope is tensioned.

4、 Safety precautions

Avoid electric shock: During disassembly and assembly, be sure to avoid electric shock. Ensure that the power is cut off and maintain a safe distance from the power source during operation.

Prevent falling: During disassembly and assembly, it is necessary to prevent components from falling and injuring people. Especially when working at heights, additional safety measures need to be taken, such as using safety belts.

Compliance with regulations: During the disassembly and assembly process, relevant safety regulations and operating procedures must be followed. Do not arbitrarily change or omit steps to ensure the safety and effectiveness of the operation.

5、 Subsequent maintenance

Regular inspection: Regularly inspect and maintain the electric hoist to ensure that it is in good working condition. Especially for key components such as wire ropes and pulleys, it is necessary to regularly inspect and replace damaged parts.

Lubrication and maintenance: Lubricate and maintain the transmission components of the electric hoist to reduce wear and extend its service life.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment