Special attention should be paid to the maintenance of stainless steel chain hoists in low-temperature environments to ensure their normal operation and extend their service life. Here are some key low-temperature maintenance recommendations:

1、 Cleaning and Inspection

Regular cleaning: Regularly clean the crane chains and components to remove accumulated dirt, grease, and ice and snow. Clean with warm water and neutral detergent, then dry with a clean cloth.

Check the chain: Check if the chain is worn, broken, or deformed. For stainless steel chains, special attention should be paid to whether there are signs of rust.

2、 Lubrication and Protection

Choose the appropriate lubricant: In low-temperature environments, lubricants that can resist the effects of low temperatures should be selected. Ensure that the lubricant can maintain its lubrication performance at low temperatures.

Apply lubricant: Apply lubricant to the chain and other critical components to reduce friction and wear. Be sure to apply evenly and ensure that the lubricant can penetrate into each link of the chain.

Chain protection: In extreme low temperatures, it is recommended to apply a thin layer of protective wax or grease on the chain to prevent it from becoming brittle or breaking due to the cold.

3、 Operation and maintenance

Preheating operation: In low-temperature environments, cranes may require preheating to operate normally. Start the crane and let it idle for a period of time to ensure that the chains and other components reach the appropriate operating temperature.

Avoid overload: At low temperatures, the strength and toughness of stainless steel chains may decrease. Therefore, it is necessary to avoid overloading the crane to prevent chain breakage or damage to other components.

Regular inspection: Regularly inspect all components of the crane, including chains, motors, reducers, brakes, etc. Ensure that all components are in good working condition and promptly replace damaged parts.

4、 Storage and protection

Indoor storage: If possible, store the crane indoors to avoid direct exposure to low temperature environments. This helps reduce rust and damage to chains and other components.

Moisture prevention measures: Ensure that the environment where the crane is stored is dry to prevent moisture from damaging the stainless steel chain and other components.

5、 Precautions

Follow the manufacturer's guidelines: Follow the maintenance guidelines and recommendations of the crane manufacturer to ensure proper maintenance and operation.

Safe operation: When operating the crane, always follow the safety operating procedures to ensure the safety of the operator and others.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment