Maintenance of Low Clearance European Electric Hoist

For the maintenance of low clearance European electric hoists, the following are some key steps and precautions:

Environmental adaptability:

When used outdoors, rainproof equipment should be installed to prevent rainwater from damaging the equipment.

Regularly keep the parts of the electric hoist dry and avoid prolonged exposure to moisture, high temperatures, or chemical environments to maintain its performance.

Chain maintenance:

Regularly lubricate the chain, especially in high dust factory environments, and apply oil more frequently to reduce chain wear.

Regularly remove foreign objects from the chain and limit groove group to ensure smooth chain operation and avoid chain jamming or breakage.

Gearbox maintenance:

Check the oil level inside the gearbox to ensure that there is sufficient oil to provide good lubrication.

Regularly check the cleanliness and viscosity of the engine oil, and replace it with new oil if necessary.

Pay attention to the sealing of the gearbox to prevent dust and moisture from entering the interior of the gearbox.

Electrical system maintenance:

Regularly check the connection wires and plugs of the electrical system to ensure that they are firmly connected and not loose.

Check the insulation performance of electrical components to prevent electrical short circuits or leakage faults.

Regularly clean the electrical system to avoid damage to electrical components caused by dust and dirt.

Handling when not in use for a long time:

If the equipment is not used for a long time, rust prevention treatment and cleaning maintenance should be carried out.

Run the equipment up and down for 1-3 minutes to maintain its performance and prevent parts from rusting or aging.

Characteristics of Planetary Gear

Planetary gears have the following characteristics:

Compact structure:

The planetary gear adopts a structure in which multiple planetary gears rotate around the sun gear, making the entire gear device more compact and suitable for situations with limited space.

Large transmission ratio:

By changing the tooth ratio of planetary gear, sun gear and ring gear, larger transmission ratio can be achieved to meet different transmission requirements.

High carrying capacity:

The multiple planetary gears of the planetary gear share the load together, making the force on each planetary gear more uniform and improving the load-bearing capacity of the entire gear device.

Smooth operation:

During the operation of planetary gears, multiple planetary gears simultaneously make contact with the sun gear and ring gear, making the operation smoother and reducing vibration and noise.

Strong applicability:

Planetary gears can adapt to different working environments and transmission requirements, and are widely used in various mechanical equipment such as reducers, gearboxes, etc.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment