When using a chain hoist, in order to ensure the safety of operation and the stability of the equipment, a series of operating procedures and precautions need to be followed. Here are some key suggestions and precautions:

1、 Preparation before operation

Certified on duty: Operators must hold valid operating certificates to ensure they possess the necessary knowledge and skills.

Equipment inspection: Before operation, a comprehensive inspection of the chain hoist should be conducted, including the hook, chain, braking device, electrical system, etc., to ensure that the equipment is in good condition and free from damage or malfunction.

Confirm the environment: Check the environment of the operating area to ensure that there are no debris or personnel staying, and set up necessary warning signs.

Wear protective equipment: Operators should correctly wear safety protective equipment such as helmets, safety shoes, protective gloves, etc.

2、 Precautions during operation

Smooth operation: When lifting or lowering a load, it should be operated smoothly to avoid sudden start and stop, in order to reduce the impact on the equipment and the shaking of the load.

Vertical lifting: Ensure that the hook is kept perpendicular to the load and avoid tilting during lifting to prevent the load from slipping or equipment damage.

Avoid overloading: Overloading is strictly prohibited when using chain hoists, and the load should be ensured to be within the rated bearing capacity of the equipment.

Pay attention to the center of gravity: During the lifting process, pay attention to the position of the center of gravity of the load to ensure stable and balanced loading.

Prohibition of diagonal pulling: It is strictly prohibited to move loads through diagonal or side pulling to avoid damaging equipment or causing safety accidents.

Maintain a safe distance: During operation, operators should maintain a safe distance from the load in case of accidents.

3、 Maintenance after operation

Cleaning equipment: After operation, the chain hoist should be cleaned to remove dust and oil stains and prevent equipment corrosion.

Check lubrication: Regularly check the lubrication condition of the equipment to ensure that all components are well lubricated, reducing wear and failure.

Storage and maintenance: Chain hoists that are not used for a long time should be stored in a dry, ventilated place and properly maintained to prevent rust and damage.

4、 Safety education and training

Regular training: Provide regular safety education and skill training to operators to enhance their safety awareness and operational skills.

Emergency drills: Regularly organize emergency drills to improve the response capabilities of operators in emergency situations.

5、 Comply with relevant laws and regulations

Compliance with regulations: When operating a chain hoist, relevant national safety production laws, regulations, and operating procedures should be strictly followed.

Accept supervision: Accept supervision and management from relevant departments and units to ensure the safety and legality of the operation process.

In summary, when using a chain hoist, it is necessary to pay attention to multiple aspects, including preparation before operation, precautions during operation, maintenance after operation, and safety education and training. Only by fully considering and strictly adhering to these regulations and recommendations can we ensure the safety of operations and the stability of equipment.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment