Welcome to Hebei Mutian Lifting Equipment Manufacturing Co., Ltd.

新闻资讯

Key points for operating a single beam crane

releaseTime:2024-11-11 10:19:42source:Mu TiannumberOfPageViews:0

Operating a single beam crane involves several key points to ensure safety, efficiency, and the integrity of the equipment. Here are the main points to consider:

Pre-operation Checks

Operator Qualification: Ensure the operator has the necessary experience and qualifications to operate the crane.

Equipment Inspection: Thoroughly inspect the crane before operation, including the wire ropes, hooks, limit switches, brakes, pulleys, and other critical components. Verify that all parts are in good condition and function properly.

Environment Assessment: Check the workspace for obstacles, sufficient space, and ground capacity to support the crane's weight.

Electrical System Test: Test the electrical system, including control cabinets, cables, and contactors, to ensure safe and reliable electrical connections.

Personal Protective Equipment (PPE): Wear appropriate PPE, such as safety helmets, protective glasses, and gloves.

Operating Procedures

Stable Operation: Operate the crane smoothly and steadily, avoiding sudden starts or stops.

Load Control: Monitor the load's stability during lifting, ensuring it is evenly distributed to prevent center-of-gravity shifts.

Communication: Maintain effective communication with ground personnel to ensure accurate instruction transmission and execution.

Adherence to Regulations: Strictly follow the crane's operating procedures, such as not exceeding the rated lifting capacity or engaging in sloping lifts.

Emergency Stop: Immediately stop the crane if an emergency occurs or if an emergency stop signal is received.

Safety Measures

No-Lift Conditions: Adhere to the "ten no-lifts" principle, which includes not lifting when the command signals are unclear, the load exceeds the rated capacity, the lifting gear is improperly used, or the load is unstable.

Clearance: Ensure there is no one underneath the lifted object, and do not use the crane as a lifting device for personnel.

Warning Signals: Sound warning signals when approaching nearby cranes or personnel.

Limit Switch Avoidance: Do not use the limit switch to stop the crane. Adjust the brake of the lifting mechanism only when there is no load.

Post-operation Procedures

Cleaning and Maintenance: Clean the crane after use to remove oil, dirt, and debris.

Record Keeping: Document any issues or abnormalities found during operation for future maintenance and repairs.

Regular Maintenance: Perform regular maintenance on the crane, including lubrication, tightening, and replacing worn parts.

Safety Checks: Conduct periodic safety checks on the crane's structure, electrical system, and safety devices to ensure they are in good condition.

Training and Updates

Operator Training: Ensure all operators receive regular safety training and are familiar with the crane's operating procedures and emergency response measures.

Skill Updates: Keep operators' skills updated with technological advancements and changes in the operating environment.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoistwire rope electric hoistHand chain hoist, lever hoist, pneumatic hoist and other lifting equipment    
   

phone
service
message
e-mail
CONTACT:
13704083030
18633230000
Mr.Liu
点击这里给我发消息
点击这里给我发消息
Ms.Cui
点击这里给我发消息
You can also input characters200(Number of characters200)