The following is a detailed guide for using stainless steel manual carts, covering key aspects such as safety checks, correct operation, maintenance, etc., to help you efficiently and safely complete production and transportation tasks:

1、 Pre use safety check

Wheel inspection

Ensure that all wheels rotate smoothly without any jamming or abnormal noise.

Check if the caster bracket is loose and if the brake device (if any) is working properly.

Attention: Overly worn wheels should be replaced in a timely manner to avoid sudden malfunctions during transportation.

Structural inspection

Observe whether there are cracks or deformations in the frame, and whether the welding parts are firm.

Confirm that screws, nuts, and other fasteners are not loose, and that the handle is not shaking.

Environmental adaptation

Choose wheel materials based on the type of floor (smooth tiles, uneven cement floors, etc.) (such as polyurethane wheels suitable for various types of floors).

2、 Correct loading and center of gravity control

Select cart type

Flat type: suitable for handling large volume, flat items (such as boxes, boards).

Bucket type: suitable for bulk materials such as sand, gravel, and parts.

Multi layer: Load small items in layers to improve space utilization.

Loading principle

Center of gravity: evenly distribute heavy objects to avoid overturning caused by uneven loading.

Overloading is prohibited: refer to the load limit indicated on the trolley label (such as light ≤ 10kg, heavy 30-50kg).

Fixed goods: Use straps or clamps to secure easily sliding items (such as oxygen cylinders, plates).

3、 Operation skills and safety regulations

Push posture

Grasp the handles tightly with both hands, lean forward slightly, maintain a steady pace, and avoid sudden acceleration or sudden stops.

Upstream and downhill techniques:

When going uphill, lean forward and use your weight to assist;

When going downhill, hold the brake and slowly reverse or follow a zigzag pattern.

Dealing with complex environments

Narrow space: Plan the route in advance, pay attention to reducing speed at corners, and prevent collisions.

Wet and slippery ground: Reduce speed and avoid sharp turns.

Team collaboration

When multiple people are moving, a unified password and synchronized actions are required to prevent the vehicle from tilting.

4、 Maintenance and upkeep extend lifespan

Daily cleaning

Wipe with a soft cloth and neutral cleaner to avoid steel wire balls and strong acids and alkalis (such as bleach).

After cleaning, wipe dry to prevent rust caused by residual water stains.

Lubrication and Inspection

Check the wheel bearings monthly and add food grade lubricating grease (mineral oil is prohibited in the food industry).

Conduct a comprehensive inspection of screws, brake pads, and frame welding points every quarter.

Long term storage

Store in a dry and ventilated place, avoiding direct sunlight or humid environments.

When not in use for a long time, regularly push the wheels to prevent the bearings from rusting.

5、 Fault handling and upgrade suggestions

Minor problem self repair: If the screw is loose, tighten it immediately, and if the sticker is damaged, replace it.

Serious malfunction: In case of wheel detachment or frame fracture, contact the supplier for repair or replacement of parts.

Upgrade options: Install anti-collision strips, electronic scales, folding handles, etc. to improve functionality.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment