Instructions for the operation and maintenance of an ultra-low clearance wire rope electric hoist are crucial for ensuring its safe, efficient, and reliable performance. Below are detailed guidelines:

Operation Instructions

Safety Precautions:

Before operating, ensure that the hoist is properly grounded and that all safety devices are functioning correctly.

Wear appropriate personal protective equipment, such as safety helmets, gloves, and protective glasses.

Ensure that the working area is clear of obstacles and that there are no personnel under the load.

Power-up and Preparation:

Confirm that the power supply to the hoist is on.

Check the controller for any damage or malfunctions and ensure it is properly connected to the hoist.

Verify that the wire rope is in good condition, without any fraying, kinks, or excessive wear.

Loading and Lifting:

Weigh the item to be lifted to ensure it does not exceed the hoist's rated capacity.

Securely attach the load to the hook and ensure that the hook is properly engaged with the wire rope.

Use the controller to lift and lower the load smoothly, avoiding sudden starts or stops.

Monitoring and Control:

Monitor the hoist's operation closely, paying attention to any unusual sounds or vibrations.

If any abnormalities are detected, immediately stop the hoist and investigate the cause.

Power-down and Shutdown:

After completing the lifting task, lower the load to the ground and securely disconnect it from the hook.

Press the stop button on the controller and cut off the power supply to the hoist.

Maintenance Instructions

Regular Inspections:

Conduct regular inspections of the hoist, including the wire rope, bearings, gears, and brakes.

Check for any signs of wear, damage, or corrosion and take appropriate action to address any issues found.

Cleaning and Lubrication:

Regularly clean the hoist to remove dust, dirt, and grease. Use a soft cloth or sponge to avoid scratching the surface.

Apply appropriate lubrication to the moving parts, such as bearings and gears, to reduce friction and wear.

Tightening and Adjustment:

Check and tighten all bolts, nuts, and screws to ensure that they are securely fastened.

Adjust any adjustable components, such as brakes and limit switches, to ensure their proper functioning.

Wire Rope Maintenance:

Regularly inspect the wire rope for signs of wear, fraying, or kinks.

Replace the wire rope if it shows excessive wear or damage.

Ensure that the wire rope is properly lubricated to prevent rusting and corrosion.

Repair and Replacement:

If any parts of the hoist are damaged or worn out, repair or replace them promptly.

Use only genuine or approved replacement parts to ensure the hoist's performance and safety.

Storage and Transportation:

When not in use, store the hoist in a dry, well-ventilated area to prevent rusting and corrosion.

Ensure that the hoist is securely fastened during transportation to prevent damage.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment