The maintenance and upkeep of stainless steel lever hoist are key to ensuring its long-term stable operation and extending its service life. The following is a maintenance and upkeep guide for stainless steel lever lifting equipment:

1、 Daily maintenance

Check the appearance:

Regularly inspect the appearance of the lifting equipment to ensure that there are no cracks, deformations, or corrosion.

Wipe the surface of the lifting device with a soft cloth to remove dust and dirt, and avoid using rough or corrosive cleaning agents.

Check the connecting components:

Ensure that all connecting components (such as bolts, nuts, and pins) are securely fastened and not loose.

Regularly inspect the wear of components such as chains and wire ropes, and replace severely worn components in a timely manner.

Lubricating components:

Regularly lubricate the rotating components such as bearings and gears of the lifting equipment to reduce friction and wear.

Use appropriate lubricants and ensure that the lubricants do not react chemically with the lifting material.

2、 Professional maintenance

Disassembly and cleaning:

Under the guidance of professional personnel, regularly disassemble and clean the lifting equipment.

When cleaning, use mild cleaning agents and soft brushes to avoid using tools such as hard objects or wire brushes that may damage the surface of the lifting equipment.

Check internal components:

Inspect the internal components of the lifting equipment, such as brakes, reducers, motors, etc., to ensure their proper functioning.

If there is any abnormality, professional personnel should be contacted in a timely manner for repair or replacement.

Adjustment and Calibration:

Regularly adjust and calibrate the lifting equipment to ensure its accuracy and performance meet the requirements.

When adjusting, follow the manufacturer's guidance and recommendations to avoid modifying the structure or parameters of the lifting equipment on your own.

3、 Storage and Preservation

Storage environment:

Store the lifting equipment in a dry, ventilated, and non corrosive gas environment.

Avoid exposing the lifting equipment to high temperatures, humidity, or direct sunlight.

Regular inspection:

Even when not in use, the lifting equipment should be regularly inspected and maintained.

The inspection includes but is not limited to appearance, connecting parts, rotating parts, etc.

Safety precautions:

During maintenance and upkeep, relevant safety regulations and operating procedures should be followed.

Ensure maintenance and upkeep work is carried out with the power disconnected and the load removed.

Use appropriate tools and equipment to avoid damaging lifting equipment or causing personal injury.

4、 Maintenance and upkeep records

Establish records:

Establish maintenance and upkeep records for each lifting device, recording the time, content, personnel, and other information of each maintenance and upkeep.

Regular analysis:

Regularly analyze maintenance and upkeep records to understand the operation status and existing problems of the lifting equipment.

Based on the analysis results, develop targeted maintenance and upkeep plans.

By following the above maintenance and upkeep guidelines, the long-term stable operation and extended service life of stainless steel lever lifting equipment can be ensured. At the same time, it also helps to improve work efficiency and safety.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment