The installation method of sliding wire (also known as sliding wire, conductive sliding wire, etc., used to provide power for electric hoists) for electric hoists (especially wire rope electric hoists) can be mainly summarized as the following steps:

1、 Preparation work

Material preparation: Prepare necessary materials such as sliding wires, brackets, fasteners, connectors, insulation materials, etc.

On site investigation: Conduct an investigation of the installation site to determine the direction, height, and length of the sliding line, as well as the installation position of the bracket.

Security assessment: Evaluate the security risks during the installation process and develop corresponding security measures.

2、 Bracket installation

Position determination: Based on the on-site investigation results, determine the installation position of the bracket on the I-beam or other supporting structures.

Installation bracket: Use bolts or other fasteners to securely install the bracket onto the supporting structure. The installation of the bracket should be flat and stable, ensuring that the sliding line can slide smoothly.

3、 Sliding line installation

Laying the sliding line: Lay the sliding line on the support according to the predetermined direction. The laying of sliding lines should be smooth, without distortion or knots.

Fixed sliding wire: Use specialized fixtures or fasteners to firmly fix the sliding wire on the bracket. The spacing between fixed points should be reasonably set according to the length and weight of the sliding line to ensure its stability and safety.

Connect power supply: Connect one end of the sliding wire to the power junction box of the electric hoist, and the other end to the power supply system. When connecting, ensure that the wiring is firm, reliable, and complies with electrical safety regulations.

4、 Debugging and Inspection

Power on test: Before powering on, all connection points should be checked to ensure there is no looseness or short circuit. Then power on to test the conductivity of the sliding wire and the operation of the electric hoist.

Adjustment and optimization: Based on the test results, adjust and optimize the installation position, fixing method, and power connection of the sliding wire to ensure that the electric hoist can operate smoothly and reliably.

Safety signs: Set up clear safety signs and warning signs around the sliding line to remind operators to pay attention to safety.

5、 Precautions

Safety first: During the installation process, safety operating procedures should always be followed and necessary personal protective equipment should be worn.

Professional construction: It is recommended to have a qualified professional construction team carry out the installation to ensure construction quality and safety.

Regular inspection: After installation, the sliding wire and its related components should be regularly inspected and maintained to ensure that they are in good working condition.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment