To control the up and down operation of European electric hoists, the following steps are usually involved:

Determine the upper and lower limit positions: Firstly, determine the limit positions for the rise and fall of the electric hoist based on actual work needs. These positions should be set according to the height of the work area, the location of obstacles, and the requirements for safe operation.

Install limit switches: Install upper and lower limit switches in the designated positions. Limit switches are key equipment for controlling the lifting of electric hoists. They can automatically cut off the power supply when the electric hoist reaches the preset up and down positions, thereby preventing the electric hoist from exceeding its working range or colliding with obstacles.

Debugging settings: Follow the instructions of the electric hoist for debugging settings. This usually includes checking power connections, testing the sensitivity and accuracy of limit switches, and adjusting the lifting speed of electric hoists. Ensure that all settings meet the working requirements and that the limit switches are functioning properly.

Operation control: Use the control device of the electric hoist (such as buttons, remote control, or control box) to operate the lifting of the electric hoist. During the operation, pay attention to observing the operating status of the electric hoist to ensure that it rises and falls according to the preset trajectory and speed.

Safety precautions: When operating the electric hoist, always follow the safety operating procedures. For example, do not overload, do not frequently start and stop, and do not stand or work under the electric hoist. In addition, it is necessary to regularly inspect and maintain the electric hoist to ensure that it is in good working condition.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment