Cleaning the soil or dirt in the electric hoist requires careful and cautious attention to ensure that the internal structure and electronic components of the electric hoist are not damaged. Here are some steps and suggestions to help you thoroughly clean the soil in the electric hoist:

1. Power off and prepare tools

Power off: Before carrying out any cleaning work, be sure to cut off the power supply of the electric hoist to avoid the risk of electric shock.

Preparation tools: Prepare clean cloths, brushes, vacuum cleaners (optional), specialized cleaning agents (if needed), and personal protective equipment (such as gloves, goggles, etc.).

2. Preliminary cleaning

External cleaning: First, use a clean cloth or brush to remove dust and dirt from the surface of the electric hoist. Be careful not to use a damp cloth to directly wipe electronic components or areas where water may enter.

Vacuum cleaner assistance: If there are small particles or dirt on the surface of the electric hoist that are difficult to remove, a vacuum cleaner can be used to assist in cleaning.

3. Thoroughly clean

Gap cleaning: For the gaps and hard to reach parts of the electric hoist, a slender brush or compressed air tank can be used for cleaning. Ensure that the brush or compressed air does not damage the internal structure of the electric hoist.

Chain cleaning: If soil or dirt is mainly concentrated on the chain, a specialized chain cleaner can be used for cleaning. Spray the cleaning agent onto the chain, then brush it with a brush, and finally dry it with a clean cloth.

4. Precautions

Avoid water ingress: During the cleaning process, special attention should be paid not to let water or other liquids enter the interior of the electric hoist, especially the motor and electrical components. If water must be used for cleaning, ensure that the electric hoist is completely powered off and thoroughly dried after cleaning.

Inspection and maintenance: During the cleaning process, you can also check whether there is wear or damage to the various components of the electric hoist. If necessary, repair or replace in a timely manner.

Use specialized cleaning agents: If cleaning agents are required, be sure to choose specialized cleaning agents suitable for the material of the electric hoist and follow the instructions in the manual for use.

5. Follow up processing

Drying: After cleaning, let the electric hoist air dry naturally or use tools such as a hair dryer to accelerate the drying process. Ensure that all components are completely dry before use.

Test: Before reconnecting the power supply, test the electric hoist to ensure that it can work normally and there are no abnormal sounds or vibrations.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment