The basic composition of MD steel wire rope electric hoist can be summarized as follows:

Structural features:

The MD model electric hoist is a lightweight lifting equipment with advantages such as compact structure, light weight, small volume, strong universality, and easy operation.

If an electric hoist with a hard tooth reducer is used, it will have a longer service life and higher mechanical efficiency.

Speed characteristics:

The MD model electric hoist has normal lifting speed and slow lifting speed, and this dual speed design allows it to operate stably and accurately during the lifting process.

Application:

MD steel wire rope electric hoists are widely used in industrial and mining enterprises, railways, docks, and warehouses.

They can be widely used for lifting heavy objects or installed on straight or curved I-shaped steel beams of monorail cantilever cranes.

They can also be used together with electric hoist gantry cranes and cantilever cranes.

Main components (based on the general structure of electric hoists):

Electric motor: Provides power for the electric hoist.

Reducer: Hardened tooth reducer is usually used to convert the high-speed low torque of the motor into low-speed high torque to meet the needs of lifting.

Drum: used for winding steel wire ropes to achieve lifting operations.

Steel wire rope: used to connect loads and electric hoists, to withstand and lift loads.

Limiter: Ensure that the electric hoist does not exceed the safe range during the lifting process.

Hook: used to connect and suspend loads.

Control system: including electrical control box, buttons, switches, etc., used to control the operation of the electric hoist.

Technical parameters (as specific parameters may vary depending on different models and manufacturers, the following are for reference only):

Load capacity: Depending on the model, there are usually different rated load capacities.

Lifting height: Depending on the model and application requirements, there are different lifting heights to choose from.

Power supply and voltage: usually according to industrial electricity standards such as 380V.

Operating speed: including normal lifting speed and slow lifting speed.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment