The assembly process of a low net empty manual chain hoist (also known as a low net manual chain hoist) usually involves multiple steps, which need to be strictly followed according to the manufacturer's guidelines and safety standards. The following is a general assembly process:

1、 Preparation work

Read and understand the instruction manual:

Before starting assembly, read the manufacturer's operating manual and assembly guide in detail.

Ensure understanding of all steps, safety requirements, and necessary tools.

Prepare tools and materials:

Prepare the necessary tools according to the instructions, such as screwdrivers, wrenches, bolts, washers, etc.

Ensure that all components and parts are complete and undamaged.

Check the work area:

Ensure that the work area is flat, stable, and meets safety standards.

Clean the work area and remove any obstacles that may interfere with the assembly process.

2、 Assembly steps

Installation base:

According to the manufacturer's guidelines, fix the base of the crane on the ground.

Use a spirit level to ensure the base is level and secure it with expansion plugs or anchor bolts.

Assemble the body:

Assemble the various components of the body in the order and manner specified in the manual.

Ensure that each component is installed correctly and secured with appropriate fasteners.

Install chains and hooks:

Thread the chain through the sprocket of the machine body and ensure its correct installation.

Install the hook and ensure it is securely fixed at the end of the chain.

Check if the opening of the hook is large enough to accommodate the required load.

Connect the electrical system (if applicable):

For electric cranes, connect the power and control wires according to the instructions.

Ensure that the electrical connections are secure and comply with safety standards.

Inspection and debugging:

After completing the assembly, carefully inspect all fasteners and connecting components for firmness.

Conduct a no-load test to ensure that the crane can lift and lower smoothly.

Check if the braking device and limiter are working properly.

3、 Safety precautions

Comply with safety regulations:

Strictly follow the manufacturer's safety regulations and guidelines throughout the entire assembly process.

Ensure that all operations comply with relevant safety standards and regulations.

Use personal protective equipment:

During the assembly process, wear appropriate personal protective equipment such as helmets, gloves, protective shoes, etc.

Avoid overload:

Before using a crane, make sure to understand its load capacity and avoid overloading.

Regular inspection and maintenance:

Regularly inspect and maintain the crane to ensure its long-term stable operation.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment