The adjustment method for the running in period of pneumatic hoists (pneumatic hoists) mainly focuses on the following aspects to ensure the stability and optimization of their performance:

1、 Equipment inspection and preparation

Comprehensive inspection: Before the running in period begins, a comprehensive inspection of the pneumatic hoist should be conducted, including the integrity of each component, whether the fasteners are loose, and whether the lubrication is good.

Cleaning and maintenance: Ensure the cleanliness of the pneumatic hoist and its working environment, avoiding impurities and dirt from damaging the equipment. At the same time, perform necessary maintenance work according to the manufacturer's recommendations.

2、 Operating standards during the break in period

Gradual loading: During the running in period, sudden loading or overloading should be avoided, and the load should be gradually increased to allow the equipment to gradually adapt to the working load.

Smooth operation: During the operation process, the smoothness of the operation should be maintained to avoid sudden starts, stops, or reversals, in order to reduce the impact and wear on the equipment.

Attention observation: During the running in period, the operation status of the pneumatic hoist should be closely observed, including sound, vibration, temperature, etc. If there are any abnormalities, the machine should be stopped and checked in a timely manner.

3、 Adjustment and optimization

Lubrication adjustment: Regularly check and replenish lubricants according to the lubrication requirements of the equipment. During the running in period, it may be necessary to adjust the lubrication points according to the actual operating conditions of the equipment to ensure good lubrication effect.

Fastener inspection and fastening: During the running in period, fasteners should be regularly checked for looseness and tightened in a timely manner. This helps to maintain the stability and safety of the device.

Performance monitoring and adjustment: By monitoring the performance parameters of the equipment (such as speed improvement, load capacity, etc.), potential problems can be identified and resolved in a timely manner. If necessary, the air pressure, flow rate and other parameters of the pneumatic hoist can be adjusted to optimize its performance.

4、 Inspection and evaluation after the break in period

Comprehensive inspection: After the running in period, a comprehensive inspection of the pneumatic hoist should be conducted to evaluate its wear and performance.

Performance evaluation: Based on the actual operation of the equipment, evaluate whether it meets the design requirements and usage needs. If necessary, the equipment can be adjusted or repaired.

The main equipment produced by Hebei Makita: stage electric hoist, electric chian hoist, wire rope electric hoist，Hand chain hoist, lever hoist, pneumatic hoist and other lifting equipment